Our one-step paint correction package includes a premium exterior detail to prepare the paint for polishing. This package is best for vehicles with minor to medium swirls or defects in the paint to restore the vehicle’s exterior to its previous glory.

This package includes the following:

Step 1: Pre-rinse and chemical decontamination to break down any dirt or grim from the lower rocker panels and front end of your vehicle.

Step 2: Wheels and tires are thoroughly detailed with quality brushes and chemicals to break down break dust and tough grease stains.

Step 3: Your vehicle is hand washed from top to bottom with ph-neutral auto soap.

Step 4: Iron remover is applied to break down any iron contaminants left in the paint from the previous steps.

Step 5: The clay bar phase is next up where automotive clay is used to remove fine materials left in the paint.

Step 6: Once the vehicle is completely dry, decontaminated, and just the bare paint remains, high-quality automotive polish is applied on each panel of the vehicle using a professional dual-action polisher.

Step 7: Once the vehicle is polished, an amazing liquid wax is applied to protect your vehicle providing amazing water beading, lasting protection and a beautiful deep shine to your paint.

Final touches include tire shine, trim restoration and touch-ups where needed to provide you with the best quality possible.

Contact us with the button below for a quote!

Our two-step paint correction package includes a premium exterior detail to prepare the paint for polishing. This package is best for vehicles with Medium swirls or defects in the paint to restore the vehicle’s exterior to its previous glory.

This package includes the following:

Step 1: Pre-rinse and chemical decontamination to break down any dirt or grim from the lower rocker panels and front end of your vehicle.

Step 2: Wheels and tires are thoroughly detailed with quality brushes and chemicals to break down break dust and tough grease stains.

Step 3: Your vehicle is hand washed from top to bottom with ph-neutral auto soap.

Step 4: Iron remover is applied to break down any iron contaminants left in the paint from the previous steps.

Step 5: The clay bar phase is next up where automotive clay is used to remove fine materials left in the paint.

Step 6: Once the vehicle is completely dry, decontaminated, and just the bare paint remains, the high-quality automotive compound is applied on each panel of the vehicle using a professional dual-action polisher to remove swirls and defects.

Step 7: After the first pass of automotive compound, an automotive polish is applied using the same method, refining the paint and smoothing out the clear coat providing a wonderful shine!

Step 8: Once the vehicle is polished, an amazing liquid wax is applied to protect your vehicle providing amazing water beading, lasting protection and a beautiful deep shine to your paint.

Final touches include tire shine, trim restoration and touch-ups where needed to provide you with the best quality possible.

Contact us with the button below for a quote!

Our ceramic coatings provide a glossy, shiny finish that will last longer than traditional waxing methods, up to 5 years depending on use and maintenance. Not only will your vehicle look amazing, but the ceramic coating will also provide increased durability and protection against scratches, chips, swirls, and other types of wear and tear.

In addition to protecting your vehicle's paint, our ceramic coatings also make it easier to clean and maintain. This coating is hydrophobic and water will bead off like it’s nothing! Dirt and grime will not be able to penetrate the coating as easily, which means that your car will stay cleaner for longer periods of time.

This package includes the following:

Step 1: Pre-rinse and chemical decontamination to break down any dirt or grim from the lower rocker panels and front end of your vehicle.

Step 2: Wheels and tires are thoroughly detailed with quality brushes and chemicals to break down break dust and tough grease stains.

Step 3: Your vehicle is hand washed from top to bottom with ph-neutral auto soap.

Step 4: Iron remover is applied to break down any iron contaminants left in the paint from the previous steps.

Step 5: The clay bar phase is next up where automotive clay is used to remove fine materials left in the paint.

Step 6: Once the vehicle is completely dry, decontaminated, and just the bare paint remains, the high-quality automotive compound is applied on each panel of the vehicle using a professional dual-action polisher to remove swirls and defects.

Step 7: After the first pass of the automotive compound, an automotive polish is applied using the same method, refining the paint and smoothing out the clear coat providing a wonderful shine!

Step 8: Once the vehicle is polished, the Ceramic Coating is applied to every surface of your vehicle. 24h cure time required in an undercover area*

Final touches include tire shine, trim restoration and touch-ups where needed to provide you with the best quality possible.

Contact us with the button below for a quote!